Overview
The JQ-YS double way hydraulic shock absorber is a specialized downhole tool designed to slow down or eliminate shock in both the vertical and axial directions during drilling operations. Unlike single‑direction shock absorbers, the JQ-YS addresses vibrations and impacts originating from bit bounce, formation changes, and drill string resonance in two orthogonal axes. By maintaining stable bit pressure and torque, this tool significantly reduces damage to drill bits, drilling tools (including MWD/LWD and motors), and surface equipment caused by shock and vibration. The ultimate goals are to improve the rate of penetration (ROP) and reduce overall drilling costs.
Key Features
Double Way Damping – Suppresses shock in both vertical (axial) and lateral/axial directions, providing comprehensive protection.
Hydraulic Damping Mechanism – Uses incompressible hydraulic fluid and metering orifices for smooth, velocity‑sensitive shock absorption.
Stable Bit Pressure & Torque – Maintains consistent weight on bit (WOB) and torque, reducing stick‑slip and bit bounce.
Protects Downhole & Surface Equipment – Reduces fatigue and impact damage to bit cutting structures, bearings, BHA components, and top drive / rotary table.
Improved Drilling Efficiency – Smoother drilling action allows higher ROP with fewer interruptions.
Cost Reduction – Lower bit consumption, reduced BHA failures, and less surface equipment maintenance directly lower drilling costs.
Working Principle
The JQ-YS shock absorber contains a hydraulic piston and cylinder arrangement filled with specially formulated hydraulic fluid. When axial (vertical) shocks occur – such as bit bounce when drilling through hard stringers or interbedded formations – the piston compresses the hydraulic fluid, forcing it through precision‑metered orifices. This creates controlled resistance that absorbs the impact energy and converts it to heat, rather than transmitting it upward through the drill string.
For directional (axial / lateral) shocks, the tool’s internal design allows slight radial or angular movement while maintaining hydraulic damping. The double way effect means that regardless of the shock direction (pure vertical, pure axial, or a combination), the tool responds by slowing the velocity of the moving parts, thereby reducing peak forces.
The result is that bit pressure and torque remain much more constant than in an undamped BHA. This stability prevents the bit from momentarily losing contact with the formation (which causes impact damage) and reduces torsional oscillations that can damage tool joints and surface drives.
Technical Specifications
| Model | JQ-YS121 | JQ-YS159 | JQ-YS178 | JQ-YS203 | JQ-YS229 |
|---|---|---|---|---|---|
| OD mm (inch) | 121 (4-3/4) | 159 (6-1/4) | 178 (7) | 203 (8) | 229 (9) |
| ID mm (inch) | 38 (1-1/2) | 44.5 (1-3/4) | 50.8 (2) | 65 (2-9/16) | 71.4 (2-13/16) |
| Connection (API) | NC38 | NC50 | NC50 | 6-5/8 REG | 7-5/8 REG |
| Max Tensile Load KN (lbf) | 1000 (225,000) | 1500 (337,000) | 1500 (337,000) | 2000 (450,000) | 2100 (472,000) |
| Tensile Yield KN (lbf) | 1600 (360,000) | 2500 (562,000) | 2500 (562,000) | 3500 (790,000) | 3600 (810,000) |
| Limited Torque KNm (lbf·ft) | 10 (7,000) | 15 (11,000) | 15 (11,000) | 20 (14,000) | 20 (14,000) |
| Torsional Yield KNm (lbf·ft) | 15 (11,000) | 25 (18,000) | 25 (18,000) | 35 (25,000) | 35 (25,000) |
| Max Working Pressure KN (lbf) | 250 (56,200) | 300 (67,500) | 350 (79,000) | 450 (100,000) | 540 (121,000) |
| Max Stroke mm (inch) | 80 (3-1/8) | 100 (3-15/16) | 100 (3-15/16) | 120 (4-3/4) | 140 (5-1/2) |
| Overall Length mm (ft) | 5105 (16.7) | 5221 (17.1) | 5418 (17.8) | 5731 (18.8) | 5834 (19.1) |
Note: Custom specifications are available upon request – refer to the technical agreement for details.
Applications
All drilling operations (vertical, directional, horizontal, extended‑reach wells)
Hard rock drilling with PDC or roller cone bits
Interbedded formations with abrupt hardness changes
Deep wells where drill string dynamics are complex
Wells with history of bit damage, BHA fatigue, or surface equipment vibration issues
The JQ-YS is especially valuable in applications where maintaining consistent WOB and torque is difficult due to severe bit bounce or torsional stick‑slip.
Value Proposition
Higher ROP – Smooth, consistent drilling action allows optimal weight and RPM without shock‑induced interruptions.
Lower Bit Cost – Reduces impact damage, chipping, and bearing failure – bits last longer.
Protects BHA – Extends life of expensive MWD/LWD tools, mud motors, and rotary steerable systems.
Reduces Surface Equipment Wear – Less vibration transmitted to top drive, rotary table, and drawworks.
Decreased Non‑Productive Time – Fewer trips for bit changes or BHA repairs.
Proven Cost Savings – By improving ROP and reducing equipment damage, the JQ-YS typically pays for itself within a single well.
The JQ-YS double way hydraulic shock absorber is a simple, effective, and reliable tool that delivers measurable improvements in drilling performance and cost efficiency. By tackling shock from two directions, it provides comprehensive protection that single‑axis dampers cannot match.
Contact Us
For technical data sheets, application engineering support, or a quotation, please contact:
Email: info@hyrig.com
JQ-YS – Double way damping, single minded cost reduction.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.