Overview
The JZY hydraulic shock absorber is a downhole tool that uses its internal compressible liquid to absorb or reduce impact and shock loads transmitted to the drill bit and drilling tools during drilling operations. Drilling through hard formations, interbedded layers, or fractured zones generates severe axial shocks (bit bounce) that can damage bit teeth, crack tungsten carbide inserts, and destroy bearing seals. The JZY shock absorber acts as a hydraulic cushion, dramatically reducing these peak forces. It is a dedicated protection tool for drill bit teeth, bearings, and the entire drill string, effectively prolonging the service life of drill bits and drilling tools while contributing to higher rate of penetration (ROP) and lower drilling costs.
Key Features
Compressible Liquid Damping – Uses a specially formulated compressible fluid (silicone‑based or similar) that provides progressive, velocity‑sensitive shock absorption.
Bit Protection – Protects both roller cone bit teeth/inserts and PDC cutters from impact damage.
Bearing Protection – Reduces shock loading on bit bearings, extending bearing life and reducing the risk of bearing seal failure.
Drill Tool Protection – Minimizes fatigue and impact damage to MWD/LWD tools, mud motors, and other BHA components.
Smooth Drilling – Maintains more consistent weight on bit (WOB), reducing stick‑slip and improving drilling efficiency.
Wide Model Range – Six sizes from 4‑3/4″ to 9″ OD, covering most common BHA diameters.
Multiple API Connections – Available with 3-1/2 REG, 4-1/2 REG, NC50, 6-5/8 REG, and 7-5/8 REG.
Working Principle
The JZY shock absorber contains a piston‑cylinder arrangement filled with a compressible hydraulic fluid. Under normal steady drilling conditions, the piston remains in a neutral position, transmitting WOB and torque with minimal compression. When a sudden axial impact occurs – for example, when a roller cone bit drops off a hard streak or a PDC bit encounters a hard nodule – the upward force on the bit compresses the piston into the fluid chamber.
Because the fluid is compressible, it acts like a very stiff spring but with built‑in damping. The fluid resists rapid compression, forcing the impact energy to be absorbed as heat rather than transmitted as a sharp peak load. The metering orifices control the rate of fluid flow, ensuring that the damping is progressive: small shocks are absorbed with little stroke, while large impacts cause greater compression and more energy absorption. After the impact subsides, the compressible fluid expands, returning the piston to its neutral position, ready for the next cycle.
This mechanism reduces peak impact forces on the bit by 50‑80% depending on the severity, dramatically extending the life of bit teeth and bearings. At the same time, the shock absorber protects the drill string above it from the reflected tensile and compressive waves that would otherwise fatigue tool joints and damage sensitive electronics.
Technical Specifications
| Model | JZY121 | JZY159 | JZY165 | JZY178 | JZY203 | JZY229 |
|---|---|---|---|---|---|---|
| OD mm (inch) | 121 (4-3/4) | 159 (6-1/4) | 165 (6-1/2) | 178 (7) | 203 (8) | 229 (9) |
| ID mm (inch) | 35 (1-3/8) | 50.8 (2) | 50.8 (2) | 55 (2-3/16) | 68 (2-5/8) | 75 (2-15/16) |
| Connection (API) | 3-1/2 REG | 4-1/2 REG | NC50 | NC50 | 6-5/8 REG | 7-5/8 REG |
| Max Tensile Load KN (lbf) | 1100 (247,000) | 1500 (337,000) | 1500 (337,000) | 1800 (400,000) | 2000 (450,000) | 2100 (472,000) |
| Tensile Yield KN (lbf) | 1950 (438,000) | 2000 (450,000) | 2000 (450,000) | 2400 (540,000) | 3500 (790,000) | 3600 (810,000) |
| Limited Torque KNm (lbf·ft) | 10 (7,000) | 15 (11,000) | 15 (11,000) | 15 (11,000) | 20 (14,000) | 20 (14,000) |
| Torsional Yield KNm (lbf·ft) | 15 (11,000) | 20 (14,000) | 20 (14,000) | 25 (18,000) | 35 (25,000) | 35 (25,000) |
| Max Working Pressure KN (lbf) | 265 (59,000) | 333 (74,000) | 333 (74,000) | 390 (87,000) | 480 (108,000) | 540 (121,000) |
| Max Stroke mm (inch) | 100 (3-15/16) | 120 (4-3/4) | 120 (4-3/4) | 140 (5-1/2) | 140 (5-1/2) | 140 (5-1/2) |
| Overall Length mm (ft) | 4105 (13.5) | 3926 (12.9) | 3926 (12.9) | 4065 (13.3) | 4050 (13.3) | 4100 (13.5) |
Note: Custom specifications and other connections are available upon request – refer to the technical agreement for details.
Applications
All drilling operations where bit bounce or axial shock is a concern
Hard rock drilling with roller cone bits (protects teeth/inserts and bearings)
PDC drilling in interbedded or fractured formations (reduces cutter impact damage)
Deep wells, directional wells, horizontal wells
Wells with sensitive MWD/LWD tools that require vibration isolation
The JZY shock absorber is particularly recommended for applications where bit life is short due to impact damage, or where BHA electronics are failing prematurely due to shock and vibration.
Value Proposition
Extended Bit Life – Protects bit teeth and bearings, typically increasing bit life by 30‑60%, reducing trip frequency.
Reduced BHA Failures – Minimizes shock damage to mud motors, MWD/LWD tools, and rotary steerable systems.
Higher ROP – Smoother drilling action allows the driller to maintain optimal WOB and RPM without shock‑induced interruptions.
Lower Drilling Cost – Fewer bit trips, less BHA repair, and faster drilling directly reduce cost per foot.
Simple, Reliable Design – No complex electronics; purely hydraulic/mechanical operation with long service life.
Versatile Sizing – Six models cover a wide range of hole sizes and BHA configurations.
The JZY hydraulic shock absorber is a proven, cost‑effective solution for protecting drill bits and downhole tools from damaging axial shocks. By absorbing impact energy before it reaches sensitive components, it delivers longer equipment life and more efficient drilling.
Contact Us
For technical data sheets, application advice, or a quotation, please contact:
Email: info@hyrig.com
JZY – Absorb the shock, extend the life.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.