Plate Check Valve – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Plate check valve is an important blowout control tool for drilling operations. Compared to other structures of back pressure valves, it offers distinct advantages including high strength, large flow area, high temperature resistance, high pressure resistance, excellent resistance to drilling fluid erosion, and easy maintenance. This valve provides reliable downhole check valve performance in demanding environments. Available in three models: FD159 (OD 159 mm, NC46), FD165 (OD 165 mm, NC50), and FD178 (OD 178 mm, 5-1/2 FH). Working pressure range 35–70 MPa (5,000–10,000 psi).

Conatct For Details
DetailReview(0)Additional

Overview
The plate check valve is an important blowout control tool used in drilling operations. Compared to other structures of back pressure valves (such as ball‑type, arrow‑type, or flapper‑type check valves), the plate check valve offers several distinct advantages. These include high mechanical strength, a large flow area (reducing pressure drop and erosion), high temperature resistance, high pressure resistance, excellent resistance to drilling fluid erosion, and easy maintenance. These characteristics make the plate check valve an ideal choice for demanding downhole environments where reliability and longevity are critical.

Key Features

  • High Strength – Robust plate design withstands extreme differential pressures and impact loads.

  • Large Flow Area – Minimal flow restriction reduces pressure drop, allowing higher circulation rates and reducing erosion on internal components.

  • High Temperature Resistance – Suitable for deep and geothermal wells with elevated downhole temperatures.

  • High Pressure Resistance – Rated working pressure up to 70 MPa (10,000 psi) to handle high‑pressure well control events.

  • Drilling Fluid Erosion Resistance – Plate geometry minimizes localized erosion caused by abrasive mud and high‑velocity flow.

  • Easy Maintenance – Simple construction allows quick inspection, cleaning, and part replacement without specialized tools.

  • Three Models Available – Covers OD from 159 mm to 178 mm with NC46, NC50, and 5-1/2 FH connections.

Working Principle
The plate check valve contains a hinged or guided plate (disc) that swings open under forward flow (downward circulation) and closes under reverse flow (upward pressure from a well kick). When drilling fluid is pumped downward, the plate pivots out of the flow path, providing a large, unobstructed bore for circulation. When forward flow stops or reverses (e.g., formation pressure pushes fluids up the drill string), the plate swings back against its seat, sealing the bore and preventing upward flow. The plate’s large sealing area and robust hinge design provide reliable shut‑off even in the presence of debris or eroded mud. Unlike ball valves or arrow valves, the plate check valve has no small orifices or narrow flow passages, which significantly reduces erosion and extends service life.

Technical Specifications

ModelOD mm (inch)ID mm (inch)Connection (API)Working Pressure MPa (psi)
FD159159 (6-1/4)65 (2-9/16)NC4635~70 (5,000~10,000)
FD165165 (6-1/2)79.4 (3-1/8)NC5035~70 (5,000~10,000)
FD178178 (7)88.9 (3-1/2)5-1/2 FH35~70 (5,000~10,000)

Note: Custom specifications and other connections are available upon request – refer to the technical agreement for details.

Applications

  • Installed in the drill string as a downhole check valve for blowout prevention

  • Used in drilling operations where high flow rates, abrasive muds, or high temperatures are present

  • Suitable for onshore and offshore drilling, including HPHT wells

  • Can be placed above or below the bit, in the BHA, or as part of the IBOP system

  • Works in vertical, directional, and horizontal wells

Value Proposition

  • Superior Erosion Resistance – Large flow area and plate design reduce fluid velocity and localized erosion, extending valve life.

  • Low Pressure Drop – Less restriction means lower pump pressures and higher circulation efficiency.

  • HPHT Capable – Withstands extreme temperatures and pressures found in deep and geothermal wells.

  • Easy to Maintain – Simple plate‑and‑seat construction allows fast servicing without specialized tooling.

  • Reliable Blowout Protection – Positive sealing on reverse flow prevents upward migration of formation fluids.

The plate check valve offers a unique combination of strength, flow efficiency, and durability that sets it apart from conventional back pressure valves. For operators seeking a reliable, low‑maintenance inside blowout control tool that can handle abrasive muds and high flow rates, the plate check valve is an excellent choice.

Contact Us
For technical data sheets, model selection guidance, or a quotation, please contact:
Email: info@hyrig.com


Plate Check Valve – Strong, smooth flow, simple to maintain.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit