Welcome to Hyrig – your trusted supplier of Shenkai ultra-high pressure ram blowout preventers (BOP) and all associated spare parts. The 140MPa (20,000psi) and 175MPa (25,000psi) series are purpose-built for the most demanding ultra-deep wells, high-pressure sour gas fields, and extreme HPHT drilling operations where standard pressure ratings are insufficient. These BOPs incorporate advanced materials engineering, finite element analysis, and rigorous testing to deliver reliable well control under extreme conditions.
Hyrig serves drilling contractors, HPHT well control specialists, deepwater operators, and oilfield maintenance teams worldwide.
| Component | Code | Meaning |
|---|---|---|
| Number of Rams | (blank) / 2 / 3 | Single ram (FZ), double ram (2FZ), triple ram (3FZ) |
| Type | FZ | Ram blowout preventer |
| Bore Size (cm) | 28 / 35 | 28 = 279.4mm (11″), 35 = 346.1mm (13-5/8″) |
| Pressure Rating | 140 / 175 | Maximum working pressure (MPa) |
| Locking Type | Default manual lock; Y for hydraulic lock |
Example: 2FZ35-140 = double ram BOP, 13-5/8″ bore, 140MPa working pressure
| Model | Bore (mm/in) | Working Pressure | Test Pressure | Configuration | Primary Application |
|---|---|---|---|---|---|
| FZ28-140 | 279.4 / 11″ | 140 MPa (20,000 psi) | 210 MPa (30,000 psi) | Single ram | 11″ HPHT well control |
| FZ35-140 | 346.1 / 13-5/8″ | 140 MPa (20,000 psi) | 210 MPa (30,000 psi) | Single ram | 13-5/8″ HPHT stacks |
| 2FZ35-140 | 346.1 / 13-5/8″ | 140 MPa (20,000 psi) | 210 MPa (30,000 psi) | Double ram (dual independent chambers) | Redundant barrier HPHT |
| FZ35-175 | 346.1 / 13-5/8″ | 175 MPa (25,000 psi) | 262.5 MPa (38,000 psi) | Single ram | Extreme ultra-deep / next-generation HPHT |
Nominal bore: 279.4 mm (11 inches)
Working pressure: 140 MPa (20,000 psi)
Test pressure: 210 MPa (30,000 psi)
Hydraulic control pressure: 21 MPa (3,000 psi rated)
Ram types supported: Pipe ram, blind ram, shear ram, variable bore ram
Flange connection: 11″ API 6BX (ring gasket BX type)
Temperature class: Metal -46°C to +121°C; Non-metal -18°C to +121°C (high-temp options available to 177°C)
Material class: AA–FF, HH–HL for sour service
H₂S resistance: NACE MR0175 compliant, anti-sulfide stress cracking
Design code: API Spec 16A, GB/T 20174
Nominal bore: 346.1 mm (13-5/8 inches)
Working pressure: 140 MPa (20,000 psi)
Test pressure: 210 MPa (30,000 psi)
Hydraulic control pressure: 21 MPa (3,000 psi rated)
Ram types: All standard ram types available
Flange connection: 13-5/8″ API 6BX (BX-type ring gasket)
Construction: Forged alloy steel body, structural optimization per FEA
NACE compliance: Full H₂S/CO₂ resistance for sour service
Design code: API Spec 16A
Nominal bore: 346.1 mm (13-5/8 inches)
Working pressure: 140 MPa (20,000 psi)
Test pressure: 210 MPa (30,000 psi)
Double ram configuration: Two independent ram chambers in single body
Hydraulic control pressure: 21 MPa (3,000 psi rated) per chamber
Ram combinations: pipe+blind, pipe+shear, blind+shear, dual pipe of different sizes
API 16A flanged: Top and bottom 13-5/8″ 6BX connections
Nominal bore: 346.1 mm (13-5/8 inches)
Working pressure: 175 MPa (25,000 psi)
Test pressure: 262.5 MPa (38,000 psi)
Hydraulic control pressure: 21 MPa (3,000 psi rated)
Ram types: Pipe ram, blind ram, shear ram
Flange connection: API 6BX, specialized for 25,000 psi rating
Temperature class: High-temperature options available up to 177°C
Anti-H₂S materials: Full sour service compliance
Design code: API Spec 16A, applicable for ultra-deep drilling
These BOPs share the following design features to address deep and ultra-deep well challenges:
Ultra-high pressure integrity: 140MPa (20,000 psi) and 175MPa (25,000 psi) ratings for extreme HPHT applications
Anti-H₂S materials: Full NACE MR0175 compliance, high nickel alloy surfacing for sour gas fields
High-temperature sealing: Seal kits and rubber components rated up to 177°C
Advanced shear capability: Shear rams capable of cutting high-strength drill pipe (G-105, S-135, V-150)
API 6BX flanges: Standardized connections for ultra-high pressure stacks
Field-proven design: 140MPa BOPs have been deployed in China‘s deepest wells (9,000m+) and ultra-deep exploration projects
Sour service ready: Designed for high H₂S and CO₂ concentration formations
A detailed instruction manual covering the entire BOP series, including model nomenclature, assembly drawings, and wear parts lists, is available from the factory.
Ram rubber (packing element, high-pressure compound) – for each pipe size
Front seal – per ram (quantity as per BOP: 1 per single ram, 2 per double ram)
Top seal – per ram (same quantity as front seal)
Side door seal rings – high‑pressure combined O‑ring (1 per side door)
Complete repair kit – all O‑rings, Y‑rings, wipers, dynamic seals for full overhaul
Piston rod seal (Y‑ring) – dynamic sealing for hydraulic cylinder
Wiper ring / dust‑proof ring
Ram block assembly (complete with rubber) – specify ram type and pipe size
Ram body (without rubber) – for field rubber replacement
Ram shaft assembly – complete with seals
Shear ram – high‑strength alloy, multiple cutting cycles
Pipe ram – for specified pipe outer diameter
Blind ram – full closure ram
Variable bore ram (VBR) – seal multiple pipe diameters without ram change
Piston rod – chrome‑plated, large‑diameter for high closing force
Piston – with high‑pressure double‑seal configuration
Hydraulic cylinder body – integral to side door
Cylinder head – bolted to side door
Locking screw assembly – manual lock backup (2 assemblies per double ram)
Leadscrew assembly – manual lock component
BOP main body – forged alloy steel (single / double ram configuration)
Side doors (left/right) – heavy‑duty hinged
Flanged connections – top and bottom, API 6BX for 20,000/25,000 psi
Ring gaskets – BX type per flange rating
Stud bolts and heavy hex nuts – high‑strength sour service grade
Lifting eyes / lugs – four‑point heavy‑duty lifting
Nameplate – stainless steel with serial number, pressure rating, certification marks
Thread protectors – for hydraulic ports and connections
Parts are high‑quality replacement and fully interchangeable with original Shenkai equipment.
Stock ready – common wear parts for 140MPa and 175MPa BOPs ship within 7‑14 days
Technical support – drawings verification before ordering; ram type configuration assistance
International shipping – by air or sea to any oilfield, HPHT project
API compliance – manufactured to API Spec 16A for ultra‑high pressure
H₂S resistant – full NACE MR0175 compliance for sour service, high nickel alloy surfacing for CO₂ resistance
Extreme temperature support – high‑temperature seal kits up to 177°C, low‑temperature variants on request
The Shenkai 140MPa and 175MPa ram BOPs are deployed in the world‘s most challenging well control environments:
Ultra‑deep HPHT oil and gas wells – formations with bottomhole pressures exceeding 20,000 psi
High‑pressure sour gas fields – wells with high H₂S and CO₂ concentrations requiring anti‑sour materials
Ultra‑deep exploration wells – record‑setting depths (9,000 m+)
FZ35-175 (25,000 psi) targets next‑generation ultra‑deep HPHT developments:
Extreme deep wells where 20,000 psi BOPs are insufficient
Forced with high strength casing strings and extreme pressures
Advanced material and structural engineering for 25,000 psi containment
Model selection guidance:
| Application | Recommended BOP |
|---|---|
| 11″ HPHT intermediate / deep wells | FZ28-140 (single ram) |
| 13-5/8″ HPHT deep well primary BOP | FZ35-140 |
| 13-5/8″ HPHT with redundant barrier | 2FZ35-140 (pipe+blind / pipe+shear) |
| Extreme ultra‑deep HPHT next‑generation | FZ35-175 |
Send your inquiry with:
Model number (FZ28-140, FZ35-140, 2FZ35-140, or FZ35-175)
Bore size (11″ or 13-5/8″)
Ram types for each chamber (pipe size, blind, shear, VBR)
Required rubber compound (standard H₂S‑resistant / high‑temperature)
Original part number (if available)
We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.