Welcome to Hyrig – your trusted supplier for replacement Shenkai FZ18-21 blowout preventer (BOP) and its full range of spare parts. We serve drilling contractors, workover crews, and oilfield maintenance teams worldwide.
Model: FZ18-21 (single ram)
Working pressure: 21 MPa (3000 psi)
Test pressure: 42 MPa (6000 psi)
Nominal bore: 179.4 mm (7 1/16″)
Piston stroke: 100 mm
Oil cylinder working pressure: 1200‑1500 psi
Ram specification (pipe sizes): 2 3/8″, 2 7/8″, 3 1/2″, 4 1/2″ blind ram
Connection type: Flanged 7 1/16″-3000 psi 6B R45 top and bottom
Temperature class (metal): -29℃ to +121℃
Temperature class (nonmetal): -18℃ to +121℃
Bolt quantity and diameter: 12-M30×3×210
Overall dimensions: 1350×380×638 mm
Ram rubber (packing element) – for 2 3/8″, 2 7/8″, 3 1/2″, 4 1/2″ pipe sizes
Side door seal – O-ring and D-ring types
Front seal – FZ18-21 front seal for ram block
Top seal – ram top rubber seal
Seal assembly (seal kit) – FZ18-21×2-7/8″ complete seal kit
Seal assembly – FZ18-21×2-3/8″ seal kit
Seal assembly – FZ18-21×3″ seal kit
Piston rod seal (Y-ring) – for hydraulic piston
Wiper ring / Scraper ring – protects piston rod from debris
Ram block (complete) – FZ18-21 ram block assembly 2-3/8″
Ram shaft assembly (ram shaft) – FZ18-21 ram shaft assembly
Ram rubber seal kit – for 2 7/8″ pipe size
Ram body (without rubber) – cast or forged steel body
Piston rod – chrome-plated, high strength
Piston – for hydraulic cylinder
Cylinder head – end cover for hydraulic chamber
Hydraulic cylinder – complete cylinder body
Oil cylinder volume (close/open) – MPC built with API standard
Closing / opening chamber seals – for hydraulic control
Side door (complete) – left or right side door casting
Side door bolt – FZ18-21 side door bolt M39×3
Locking screw – manual locking shaft
Locking screw seal ring – O-ring around locking screw
Locking screw nut & handle – manual lock accessories
Threaded stem assembly (leadscrew assembly) – FZ18-21 lead screw assembly
Stud bolt – for head and door connections
Nut (heavy hex) – Grade B7 or equivalent
Socket head cap screw – for internal assembly
Guide pin / Dowel pin – for alignment
Retaining ring – for piston and shaft fixation
BOP main body – single ram housing, FZ18-21
Studded connection flanges – top and bottom flanges
Nameplate – with serial number and rating
Lifting eyes / lugs – for handling
All parts are high‑quality replacement (aftermarket) – fully interchangeable with original Shenkai (Shanghai Shenkai) FZ18-21 components. We do not sell fake parts; our replacements meet or exceed OEM specifications.
Stock ready – common wear parts ship within 3‑7 days
Technical support – drawing verification before ordering
International shipping – by air or sea to any oilfield
Cost‑effective – complete seal kits reduce your inventory cost
Anti-H2S performance – conforms to NACE MR 0175 standard
The FZ18-21 blowout preventer is widely used in oil and gas drilling operations to close the wellhead during oil testing, workover, completion and other operations to prevent blowout accidents. It can be used alone or in combination with annular BOP assemblies for high-pressure well control.
Send your inquiry with part name, desired pipe size (for ram rubber), or original part number. We will reply with a quote and technical drawing if needed.
For any inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.