Shenkai FZ18 Series Ram BOP – FZ18-14 / FZ18-21 / FZ18-35 / FZ18-70

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Shenkai FZ18 Series single ram blowout preventers cover working pressures from 14MPa to 70MPa, nominal bore 179.4–184mm (7″ to 7‑1/16″). Models: FZ18‑14 (14MPa/2030psi), FZ18‑21 (21MPa/3000psi), FZ18‑35 (35MPa/5000psi), FZ18‑70 (70MPa/10000psi). We supply replacement BOP units and full spare parts: ram rubbers for 2‑3/8″ to 5″ pipe, side door seals, front/top seals, complete repair kits (seal kits), ram blocks, ram shafts, pistons, hydraulic cylinders, locking screws, stud bolts, and ring gaskets (R45, R46, BX156). All parts are fully interchangeable with original Shenkai (Shanghai Shenkai) equipment. Ideal for drilling, workover, well control, and high‑pressure deep well operations. Fast international shipping.

Conatct For Details
DetailReview(0)Additional

Welcome to Hyrig – your trusted supplier for replacement Shenkai FZ18 Series ram blowout preventers (BOP) and all spare parts. Our FZ18 series covers four working pressure ratings to meet different well control requirements. We serve drilling contractors, workover crews, and oilfield maintenance teams worldwide.

Quick Model Comparison

ModelWorking PressureTest PressureNominal BorePipe SizesRecommended For
FZ18-1414 MPa (2030 psi)21 MPa180 mm2‑3/8″, 2‑7/8″, 3‑1/2″Low pressure / light workover
FZ18-2121 MPa (3000 psi)42 MPa180 mm (7‑1/16″)2‑3/8″, 2‑7/8″, 3‑1/2″, 4‑1/2″ blindStandard drilling operations
FZ18-3535 MPa (5000 psi)52.5 MPa180–184 mm (7‑1/16″)2‑3/8″, 2‑7/8″, 3‑1/2″, 4‑1/2″ blindMedium‑high pressure wells
FZ18-7070 MPa (10000 psi)105 MPa179.4 mm (7″)2‑7/8″, 3‑1/2″, 4‑1/2″, 5″, blind, shearHigh pressure / deep wells

All Replacement Spare Parts Available for FZ18 Series

Sealing Components (Wear Parts – Highest Consumption)

  • Ram rubbers (packing elements) – for all pipe sizes from 2‑3/8″ to 5″

  • Side door seals – O‑ring and D‑ring types for each model

  • Front seals – for ram block (FZ18-14, FZ18-21, FZ18-35, FZ18-70)

  • Top seals – ram top rubber seals

  • Complete repair kit (seal kit) – includes all O‑rings, wipers, and dynamic seals for each model

  • Piston rod seals (Y‑ring) – for hydraulic piston

  • Wiper rings / Scraper rings

Ram Assembly Components

  • Ram block (complete) – with or without rubber

  • Ram shaft assembly

  • Ram body – cast or forged steel

  • Blind ram – for empty wellbore (FZ18-21/35/70)

  • Shear ram – for cutting pipe (FZ18-70 only)

Hydraulic & Operating Parts

  • Piston rod – chrome‑plated

  • Piston – for hydraulic cylinder

  • Cylinder head

  • Hydraulic cylinder body

  • Closing / opening chamber seals

Side Door & Locking Mechanism

  • Side door (left/right)

  • Side door bolts – M39×3 for FZ18-21, other sizes for -14/-35/-70

  • Locking screw assembly – manual lock shaft, nut, handle

  • Leadscrew assembly (threaded stem assembly)

Fasteners & Hardware

  • Stud bolts – for flanges and doors

  • Heavy hex nuts – Grade B7 or equivalent

  • Ring gaskets – R45 (FZ18-14/21), R46 (FZ18-35), BX156 (FZ18-70)

  • Socket head cap screws, guide pins, retaining rings

Body & Structural Parts

  • BOP main body – single ram housing

  • Flanged connections – top and bottom

  • Nameplate, lifting eyes

All parts are high‑quality replacement (aftermarket) – fully interchangeable with original Shenkai (Shanghai Shenkai) FZ18 series components. Our replacements meet or exceed OEM specifications.

Why Choose Us?

  • Stock ready – common wear parts ship within 3‑7 days

  • Technical support – drawing verification before ordering

  • International shipping – by air or sea to any oilfield

  • Cost‑effective – complete seal kits reduce your inventory cost

  • Anti‑H2S performance – conforms to NACE MR 0175 (FZ18-21/35/70)

Applications

The Shenkai FZ18 series ram BOPs are widely used in oil and gas drilling, workover, completion, and well control operations to prevent blowouts. They can be used alone or combined with annular BOP stacks. Higher pressure models (FZ18-70) support deep well and high‑pressure HPHT environments.

How to Order

Send your inquiry with model number (FZ18-14, -21, -35, or -70), desired pipe size (for ram rubber), or original part number. We will reply with a quote and technical drawing if needed.

For any inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit